Seco-Larm SD-997A-GBQ Electric Deadbolt, Fail-Secure Operation, Door Open/Close Monitor (NO/C/NC), Magnetic Switch Senses Door Position for Positive Locking, Over-Current Protection 1.5A, 12/24 VDC

Seco-Larm SD-997A-GBQ Electric Deadbolt, Fail-Secure Operation, Door Open/Close Monitor (NO/C/NC), Magnetic Switch Senses Door Position for Positive Locking, Over-Current Protection 1.5A, 12/24 VDCKey FeaturesAdds concealed deadbolt security to most wood or hollow metal doors, with the convenience of electrical operationIncorporates manual lock/unlock cylinder to operate the SD-997A-GBQ if power is lost (turn lock knob from inside protected premises and/or use key from outside protected premises)Stainless steel bolt, 5/8” diameter, 5/8” throwFail-secure operation (locks if power is lost)Magnetic switch senses door position for positive lockingIncludes control wire which allows for releasing without cutting unit's powerAttempts to relock multiple times if the door is not closed properly to prevent the solenoid from burning out. Once the door is closed properly it will automatically lockOver-current protection 1.5A.Door open/close monitor (NO/C/NC)Adjustable door lock delay timer (0,3,5, or 9 seconds)Use with an optional digital keypad for high security without a key. Easily connects to SECO-LARM Digital KeypadsSuitable for office-type applicationsShallow design for use with most metal door jambsMulti-directional horizontal or vertical mountingPowered by a solenoidStainless steel for strength and long lifePlug: Special conic cavity stainless steel (thickness 1.5mm~1.8mm)SpecificationsOperation: Fail-secureCurrent Draw- Standby: 330mA@12VDC / 205mA@24VDCCurrent Draw- Active: 880mA@12VDC / 470mA@24VDCStatus Sensor: SPDT, 250mA @ 12VDC (NO/NC/COM)Operating Voltage: 12/24 VDCAdjustable Delay Timer: 0, 3, 5, 9 secondsWeight: 2-lb 5-oz (1kg)

• Adds concealed deadbolt security to most wood or hollow metal doors, with the convenience of electrical operation
• Incorporates manual lock/unlock cylinder to operate the SD-997A-GBQ if power is lost (turn lock knob from inside protected premises and/or use key from outside protected premises)
• Attempts to relock multiple times if the door is not closed properly to prevent the solenoid from burning out. Once the door is closed properly it will automatically lock
• Includes control wire which allows for releasing without cutting unit's power
• Use with an optional digital keypad for high security without a key. Easily connects to SECO-LARM Digital Keypads